• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

Over time, the handles on your doors will get worn out and need to be changed. When replacing them, it is crucial that the new handles are in line with the critical dimensions of the previous handle.

The top screw's location the lever, and the keyhole sizes are the three measurements you need to check. Check the size guide for assistance in this.

Inline Lever/Lever

A lever handle or lever is a modern door handle designed to suit new or replacement doors. This style of door handle is available in a variety of styles and finishes. A number of manufacturers make this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles of uPVC/Composite are made of robust materials and are suitable for doors with multi-point locks that require a strong design. The handles are inline, and they utilize the same screws and spindle to fix them. They are easily fitted on any uPVC/Composite door.

The handle can be positioned and angled to fit any user. The handle has been tested to 200,000 cycles. This will ensure the quality of the finish and performance of the handle over time. The sprung lever can also be cut to fit a wider range of locks. This is particularly useful in doors with smaller patio door handle with lock frames where the cylinder is further back. A shortened lever is also an ideal choice for doors where the latch could be operated by a thumb turn inside.

Lever Pad

A Lever Pad upvc door handle operates differently from lever-type handles on doors. These handle types can either operate from a single spindle (inline) or independently from both sides using two offset or inline spindles (pad). They are commonly used on UPVC doors with double glazing. They are available in a variety of finishes and variations.

The handles have been tested to a minimum of 200 000 cycles and are available in various finishes like White, Silver, Chrome & Gold. The finish is compliant with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high level of durability and performance for the intended use.

All of the UPVC lever pad designs come with a spindle and screws that allow them to be installed on an existing or new upvc sliding door handle door. The backplate fixation centres of 211mm allow for a wider handle, which is typically an advantage when replacing an old or faulty multi-point door lock mechanism. The levers for these handles have a spring, which solves the issue of handles for doors that slide out of horizontal position when not being used.

It is important to match up the PZ dimensions of both the multipoint lock as well as the uPVC doors when choosing a replacement UPVC spindle and handle. This measurement is also called the 'handle centre' or 'cylinder centres' and is a critical aspect to match the right handles.

After you have identified the proper PZ size and the correct PZ size, you must make sure that the lever and push pads are shaped to fit the American with Disabilities Act compliant handles that you need for your door. They are typically round or square with an internal lever, and an external push pad.

The majority of the UPVC Lever Pads we offer are spring-loaded. This means they will return to a horizontal position when not in use instead of hanging and possibly securing to the frame. This prevents draughts from entering the property. The majority of UPVC lever pad style handles are available in left and right handed models which allows them to be installed on either side of doors.

Euro Cylinder

Cylinder locks are typically used on uPVC doors, but they can be utilized on other types of window handles of door. The cylinder lock operates with a key that unlocks the cylinder's casing. This reveals pins that can be aligned to those inside the lock, allowing them to rotate the revolving camera, thereby opening the door. Euro cylinders can be fitted with up to six pins. Internal and external doors require different levels of security.

Selecting the right cylinder for your needs is vitally important; this depends on the way your door and handle are used. External doors, for instance, should be fitted with higher security cylinders, whereas internal doors can be secured with an ordinary cylinder. Certain cylinders come with extra features that can improve security, such as anti-drill or anti bump properties.

A euro cylinder needs to be measured accurately to ensure that it is the correct size for your door. The cylinder should be measured from the hole for fixing screws in the middle to the end of the cylinder including the thumb turn if you have one. It is recommended to do this with the lock in place however in the event that this is not possible, you may take it off to measure. It is crucial to avoid having a extension of the cylinder beyond the handle or escutcheon. This could make it susceptible to lock snapping attacks.

The design of the latest cylinders comes with anti-drilling as well as bump resistance features. These are designed to reduce the risk of attack by causing the cylinder to rotate in the opposite direction. This can help prevent attacks and ensure your doors are secure.

There are cylinders that are made to withstand snapping. This is a common occurrence on cylinders. A specially designed tool is used to break the lock's break line and then the front of cylinder is snapped off. This is a faster and more convenient method of gaining access than using a multipoint locking system. It also leaves less evidence of the burglary which could hinder insurance claims.

Spring Cassette

The spring cassette is situated within the base plate of the victorian door handle handle. It is a spring-loaded solution to help return the multipoint lock handles to their original position after usage. There was a time when handles did not have a spring integrated into them and without this they are more likely to slide or 'drop' once the locking mechanism has been disengaged. The addition of this simple element is one of the best ways to correct this and it is also a great way to prevent your doors made of upvc from becoming stuck in an open or closed position, as these aren't always simple to manually close by hand.

These spring cassettes have been specifically designed to be used with multipoint locks sprung They will not work with non-sprung multipoint handles. You must have a custom hole cut into your backplate to allow these to fit (please check the image for a technical diagram). They are a replacement for existing broken or missing cassettes within the backplates of door handles of various brands of uPVC doors. They are supplied in one unit. They feature a square cut out that accommodates an 8mm shaft.

These spring cassettes provide an excellent value solution for the problem of sagging door handles. They are easy to fit and will prolong the life span of your uPVC doors. Contact us for more information about our selection of uPVC accessories and spares. We are always available to offer expert advice and to assist you.