• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When it's Time for Window Replacement

It's time to replace your old windows if they are no longer able to protect your home from the elements, reduce noise or enhance the architecture. Where do you begin?

There are a myriad of factors to take into consideration. We'll break down the factors to help you select the right style, energy consumption and labeling installation, and cost.

Energy Efficiency

Energy savings is among the main reasons that homeowners decide to invest in new windows. In reality replacing old, drafty windows can cut heating and cooling costs by up to 20%. Some people are disappointed when they discover that their energy savings do not make up the initial cost of new replacement windows for a long period of time.

Window performance and operation should be a major consideration for any homeowner considering replacing their windows. A window that isn't working properly can increase your home maintenance expenses, utility bills and increase the chance of air leaks. For example windows that do not move up and down, or slide side-to-side correctly may require replacement because the frames have become warped or swollen due to excessive moisture caused by condensation or lack of sealing.

Mildew or mold that has developed on the inside and outside of the frame is another indication that it's time to replace your windows. This is usually a sign of faulty seals or damaged weather stripping. If these issues are not taken care of promptly, the resulting mold and mildew can cause health and safety problems for your family.

New replacement windows can also increase security in your home as well as curb appeal and resale value. These benefits are increased when windows used in a renovation are energy-efficient according to the National Fenestration Rating Council.

The energy efficiency of windows is measured by their U-factor. The lower the U-factor, the more insulation power the window offers. A good rule of thumb is to search for a U-factor lower than 0.26. In addition to the U-factor, other aspects to consider when evaluating energy efficiency include frame material and design. Vinyl offers a durable low-maintenance option, however it will expand and contract as temperature fluctuations, which can lead to leaks. Wood provides a classic look and better insulation, but it requires regular maintenance; aluminum is a lightweight material that is easy to maintain, but it conducts heat quickly and is not a good insulator.

For the best results homeowners should consult an experienced window installation professional to ensure that the new windows are properly installed. A professional can assist you select the right windows to match your home's architectural style and climate zone. They can also provide information on the resale value of windows and homeowner satisfaction.

Style

New windows always enhance the value of your home. It can be a bit overwhelming to think about all the different kinds styles, styles and configurations that are available. The choice isn't only about design or functionpicking the wrong windows could detract from a home's resale value.

Window contractors use different ways to replace frames with more energy-efficient ones depending on their state of repair. A contractor can replace the frame on the outside with a pocket glass replacement windows. The interior trim and sashes are left intact. Another option, which is often suggested for older homes or older areas with strict requirements for grills or sash packs, is to use a sash pack replacement. These are kits that come with jamb liners made of wood or aluminum and a replacement sash for both the upper and lower halves.

Another option is to put in full-frame replacement windows, which require removing the entire existing frame and the sash. This is recommended when the windows in place are no longer repairable. Full frame installations are also recommended for homeowners who want to change the type of window, for instance by replacing double-hungs with sliders or cases.

When purchasing windowpane replacement windows, search for windows with the NFRC label, which indicates the window's energy-efficiency rating. The higher the rating, the more efficient the window.

Before installing your new window, loosen and remove the stops that keep the window in place. Be careful when working around the sill of your existing frame to ensure you don't scratch the wood, and if necessary, shim it. When the new window is in place, shim the top and bottom edges to ensure a tight fit and add caulk around the outside edge to seal it.

If the window you've chosen doesn't quite fit the opening, use foam-rubber backer rod to fill any gaps larger than 1/4 inches (0.64 centimeters). This is a better solution alternative to caulk, which can trap moisture and lead to wood rot and mold. If you have any gaps that are larger than this, you can screw 1 in (2.5 cm) furring strips to the sides of your existing frame to raise the height.

Budget

Window replacement window panes is an expensive investment, but the energy efficiency and increased home comfort it provides makes it worth the initial investment. It also enhances the value of your home and may help reduce utility bills. It is essential to establish an amount of money before beginning your project to guide your choices. Take into consideration your household's requirements for energy and the type of windows you would like to install. A reliable contractor can give you an insight into your costs over and above your personal budget, and offer solutions to reduce them.

Window frame materials are one of the major factors that determine the cost of replacement windows. Aluminum and vinyl frames are the cheapest alternatives, whereas wood and composite frames are more. Consider the benefits and drawbacks of each frame material to help you decide the best one for your home. Wood windows, for instance, are more durable, offer better insulation, however they require regular maintenance and are susceptible to damage from moisture. Vinyl and aluminum are both less expensive but they are prone to rusting, and do not provide the same level insulation as wood.

The window replacement company might offer different installation methods which could impact the total cost. The most labor-intensive is a complete replacement of the frame. This involves removing the entire window and replacing it with a brand new unit. This method is often advised when frames are damaged or have rotted. It is also recommended for historical renovation projects. An alternative that is less expensive is to replace the insert window. During the process, the old sash, operating hardware, and exterior trim are removed. However the exterior trim and siding are left intact. The new window is then inserted into the opening, insulated, and sealed.

If you are doing the work yourself, you should take into account the cost of the tools. A caulk gun, shims that are waterproof and tape measure are necessary. Make sure you purchase shims with different thicknesses so that you can accommodate the different heights of your window sills as well as head jambs. You'll need elastomeric sealant to fill in any gaps between the casing and frame.

Installation

Windows are available in many sizes and shapes to suit the distinctive design of each home. The options include double-hung, single-hung sliding bay bow, casement, circle, garden, awning, jalousie and egress windows. They are also available in different materials and finishes. Some are insulated for further energy efficiency.

Replace your old windows that are inefficient with energy-efficient double-hung window to save money. The process is relatively easy however the results are well worth it. You'll also get the benefits of having a beautiful new, fresh window Replacement glass.

Before you install your new window, take out the screen and sash of the previous frame. This makes it easier to move the frame and will protect the material. You'll require caulk to seal the frame on both sides and any gaps, if there are any. Use the caulk that is recommended.

Based on your preference and the condition of your existing frame, you could opt to use plastic or cedar shims to ensure the window sits properly in the opening. Be careful not to over-shim your window, however, as this can cause water and condensation to build within the frame, which can cause deterioration of the materials.

The installer will make sure that the frame is level, plumb, and thoroughly caulked once the window is installed. Then, you can reinstall any trim inside that was removed to make room for the new window. Paint or stain the new window to match the color scheme of your home. Be sure to seal and insulate the sill, jambs and flange on the exterior of your house to further enhance the window's performance.